How To Sharpen Clipper Blades With Aluminum Foil

How To Sharpen Clipper Blades With Aluminum Foil (Tin can it be done?)

You want to avoid edgeless clippers. In this example, weak poor-performing hair clipper blades. Sometimes blades need to be sharpened to perform at their all-time.

However, we may not always accept tools like a grindstone or sandpaper to acuminate our blades. Notwithstanding, is aluminum foil the reply? Will it really sharpen your clipper?

I did the research and have the answers for yous below.

So let's have a wait.

Contents

1 Does foil acuminate blades?
- one.1 Benefits of Aluminum Foil
- i.two step 1:
- i.iii step 2:
- 1.4 Step 3:
- 1.five Step 4:
- 1.half dozen Stride 5:
- 1.7 Step vi:
2 How practise you acuminate clipper blades with aluminum foil?
- 2.1 Footstep ane:
- 2.ii Step 2:
- 2.3 Stride 3:
- two.4 Step iv:
- ii.v Footstep 5:
- ii.6 Step 6:
- 2.seven Pace 7:
- 2.8 Step eight:
3 How to sharpen your own clipper blades
4 Conclusion

Does foil sharpen blades?

Aluminum foil does not actually sharpen clipper blades. In fact, it struggles to actually 'sharpen' whatever bract for that matter.

Aluminum foil is a sheet that isn't physically capable of sharpening a hard blade. Most clipper blades are made from hardened steel.

In order for blades to be properly sharpened, the contrary object needs to provide plenty friction to chip away the metal on the surface to reveal the sharper metal below.

Aluminum foil simply cannot do that. Aluminum is made out is made from

98.5% Aluminum
i.v % Iron/silicone

To put it simply, Aluminum foil is far too lite, the blend cannot requite the resistance to properly sharpen a pilus clipper blade.

Benefits of Aluminum Foil

However, Aluminum can do good a hair clipper in other ways.

While it may not be able to acuminate a hair clipper blade to the level of a grindstone or sandpaper, It can clean the surface of the bract.

Aluminum foil can help to remove micro-hairs and grease on the front of a hair clipper blade.

Doing this leaves your blade with a shinier, smoother, and cleaner surface.

This can improve cutting performance as well equally help your clippers to last longer.

Besides, when using aluminum foil on your clipper blades, you can as well find grooves and dents in your blade.

Dents in a hair clipper are a sign your pilus clipper blades are damaged and may exist sharpened professionally as doing it at abode cool brand the impairment worse

Using Aluminum foil to check for dents before you sharpen your blades with other tools can exist highly beneficial, here'due south how to check for dents in our blades

step 1:

Remove your blades from your clipper

Brush them downwardly with a hard bristle castor wash and wipe them with water and a cloth

step 2:

Place a sheet of aluminum foil on a flat surface

Footstep 3:

Place your blade down on the canvas (the side where both blades touch) and pass the blade on the sheet x-15 times moving away from the teeth

Step iv:

Take your blade off the sheet and place to 'sharpened' side facing upwards

Stride 5:

Now using the nail, run it across the teeth of your bract and wait to experience any bumps and dents.

Step 6:

If you feel whatever large dents on your blade they are more than likely damaged and they demand to exist looked at professionally or be replaced.

You can leave the blades as they are if you are still satisfied with their functioning. Notwithstanding, if yous desire clippers to perform at their all-time they volition need professional attention or need to be replaced.

Somewhen, damaged blades volition decrease in performance and lose their value over fourth dimension.

Aluminum foil can help yous to spot this sooner.

How exercise you lot sharpen clipper blades with aluminum foil?

Aluminum foil has keen cleaning backdrop. Aluminum foil can assistance make clean your blades of grease besides as increment shine. This procedure can slightly sharpen your blade but not at the level at which a grindstone or sandpaper tin do.

Here is a brief outline of how to polish your clipper blades with aluminum foil:

Stride 1:

Detach your bract from your clipper, y'all can practise so past removing the screws on the back of the blade.

Or alternatively, y'all have a detachable hair clipper, you can pop the bract out by pushing against the teeth every bit shown below.

Stride two:

Brush the blade with a hard bristle brush and wash both blades in common cold water

Pace three:

Dry both blades with a towel

Footstep 4:

Place an aluminum sheet on a flat surface

Step v:

Identify the back of your blade on the sail and slowly slide up and down

Pace 6:

Slowly but firmly each blade over the sheet equally many times every bit you become the smoothen you desire. (but expect keep it to under 50 passes) . This should exist enough for a good amount of shine.

Take your time with this step and do not rush, beingness impatient can pb to you ripping the canvas and becoming frustrated.

Step 7:

Pace 8:

When the blades are shinier than what it was previously you lot tin stop.

Now you can put your blade back together and attach it to your clippers.

If yous have a blade such like below, information technology may become complicated to put it dorsum together.

This video can also help in re-assembling your hair clippers if your struggling.

This process of 'sharpening' your blades to make clean and polish them is quite useful for overall hair clipper maintenance.

Shining your blades can go you into the rhythm of working with a blade and also give y'all some skills to actually acuminate your blades yourself at home.

I believe yous can sharpen your own hair clipper blades and I advocate for this over professionals here's why.

How to sharpen your own clipper blades

Sharpening your own clipper blade is not hard. Many say clippers need sharpening professionally.

I don't believe this to be true.

Professional bract sharpeners are no different to yous and me. Blade sharpening is a skill that can be easily picked upwardly.

If you can get the tools and are able to follow instructions you are more capable of sharpening your ain hair clipper blades and you save a lot of money in the process.

Why do blade sharpenings even cost so much?

This is considering professionals frequently charge the cost of your clippers merely to go the blades sharpened and become cleaned. It adds upward and can exist too much at times.

This is why I advocate for cocky/home sharpening equally I believe

You will salve more money over time
It's a skill you must learn to have full blade mastery

However, I do believe you lot should accept your blades checked professionally if there are signs of damage such equally denting which I mentioned earlier.

Then before you type 'pilus sharpening near me,' I recommend you attempt it yourself starting time if you lot want to principal the skill.

A guides to hair clippers sharpening can exist found on the blade sharpening page.

Conclusion

You lot should have a better understanding of how to 'sharpen' a clipper blade with aluminum foil, while it may not be able to amend the sharpness of your clipper, Aluminum foil tin can:

Assistance detect dents in clippers
Meliorate shine and clippers and keep them clean

Both of these are of import in possibly improving your pilus clipper longevity. Then wait to get your blades properly sharpened using a grindstone or sandpaper.

If you have found this article on How To Acuminate Clipper Blades With Aluminum Foil helpful, please leave a comment with your experience with aluminum foil and check out other related manufactures:

HOW TO SHARPEN Dog Hair CLIPPERS

Source: https://clipphub.com/how-to-sharpen-clipper-blades-with-aluminum-foil/

How To Sharpen Clipper Blades With Aluminum Foil